DIY Fixes For Clogged Drains

Clogged drains aren’t something most people think about until it happens. The problem can occur in any drain, but there are some steps you can take to help clear a clogged one. However, not addressing the issue immediately can be worse than not fixing it at all.

Clogs can be caused by many things, such as hair, oil, grease, food, and fibrous items. When a clog occurs, it can make your sink overflow, cause a toilet to not flush properly, or prevent waste from being drained properly. If you’re worried about water damage, call an expert for an inspection. You can also take matters into your own hands and try some DIY fixes.

The first step to unclogging a drain is to use a plunger. A plunger will produce a vacuum that will loosen the clog and hopefully free it up. Be sure to keep the plunger submerged in the water and jerk it to force water in both directions.

Next, you want to have a look at your drain’s clean out fittings. They should be easy to remove with pliers. Remove the old trap and replace it with a new one.

You can also get a power auger and run it down the drain. Most of these models have a foot pedal switch for easier operation. Once you’ve got the right tool for the job, you can set the motor to the clockwise rotation, back out the cable, and reverse direction to unclog the clog.

Another effective way to clear your clogged drain is to pour boiling water into the drain. This can be especially helpful if the clog is located in a metal pipe. Make sure you’re careful when you do this, because the boiling water can cause the clog to break up and move through the pipe.

A wire coat hanger is a fun, DIY clog clearing device. It’s usually hooked on the end of a hook and is adjustable so you can adjust it to fit your drain opening. For example, if you have a larger drain, you can advance the wire into the clog until it breaks up or dislodges. Claremont Drain Cleaning

Using the baking soda and vinegar method is another great way to clear your drains. Mix the soda with salt and let it sit for several hours. Then, flush with boiling water and repeat as needed.

Lastly, you can buy a drain snake. These are sold at home improvement stores and can be quite useful if you’re dealing with a clog that’s more difficult to access. Usually, the best drain snakes have an aggressive tip that can break up and dislodge more complex clogs.

There are plenty of other ways to solve your clogged drain problems, so give them a try. Regardless of what you choose, make sure to wear gloves when handling the tools. Otherwise, you could wind up causing a lot more trouble. As with any plumbing task, be sure to have all the necessary tools before you begin.